Rear Console Box - Removal(2007/12 - 2009/01)

1. Remove shift lever knob sub-assembly (for automatic transaxle)

2. Remove shift lever knob sub-assembly (for manual transaxle)

3. Remove no. 1 instrument cluster finish panel garnish

4. Remove no. 2 instrument cluster finish panel garnish

5. Remove floor shift position indicator housing sub-assembly (for automatic transaxle)

6. Remove upper console panel (for manual transaxle)

7. Remove upper console rear panel sub-assembly (for automatic transaxle)

8. Remove upper console rear panel sub-assembly (for manual transaxle)

9. Remove console box pocket

10. Remove console box carpet

11. Remove console box assembly

​

1. Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.

1. Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.

1. Disengage the 2 clips and remove the No. 1 instrument cluster finish panel garnish.

1. Disengage the 2 clips and remove the No. 2 instrument cluster finish panel garnish.

1. Disengage the 6 claws and the 3 clips, and then remove the floor shift position indicator housing sub-assembly.

2. with Seat Heater System:
   

   1. Disconnect each connector.

1. Open the lid of the upper console panel.

2. Apply protective tape to the area shown in the illustration.

3. Using a moulding remover, disengage the 2 claws and the 5 clips, and then remove the upper console panel as shown in the illustration.

1. Disengage the 3 claws and the 5 clips.

2. Disengage the clamp.

3. Disconnect the connector and remove the upper console rear panel sub-assembly.

1. Disengage the 3 claws and the 5 clips, and remove the upper console rear panel sub-assembly.

1. Remove the console box pocket.

1. Remove the console box carpet.

1. Remove the 2 screws.

2. Remove the 2 bolts and the console box assembly.