Ignition Switch - On-Vehicle Inspection

Brand:

Toyota

Model Name:

Camry ACV40 GSV40

Manual:

Repair Manual

Section:

2Az-Fe Starting

Title:

Ignition Switch

  1. Inspect ignition or starter switch assembly



​

1. INSPECT IGNITION OR STARTER SWITCH ASSEMBLY
  1. Check the resistance.Using an ohmmeter, measure the resistance between the terminals.Standard resistance:ConditionTester ConnectionSpecified ConditionLOCKBetween all terminals10 kΩ or higherACC2 - 4Below 1 ΩON1 - 2 - 4Below 1 Ω5 - 6 START1 - 3 - 4Below 1 Ω5 - 6 - 7 If the result is not as specified, replace the ignition or starter switch. Camry

  2. Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Condition
      		Tester Connection
      		Specified Condition
      LOCK
      		Between all terminals
      		10 kΩ or higher
      ACC
      		2 - 4
      		Below 1 Ω
      ON
      		1 - 2 - 4
      		Below 1 Ω
      5 - 6
      START
      		1 - 3 - 4
      		Below 1 Ω
      5 - 6 - 7
      If the result is not as specified, replace the ignition or starter switch.