Lumbar Support Adjuster Assembly - Installation(2009/01 - 2010/08)

1. Install lumbar support adjuster assembly

2. Install front separate type seatback cover with pad

3. Install front seat headrest support

4. Install front seat headrest support

5. Install front seatback board sub-assembly

6. Install front seat cushion shield inner

7. Install front seat inner belt assembly

8. Install front seat cushion shield assembly

9. Install slide and vertical power seat switch knob

10. Install reclining power seat switch knob

11. Install front seat assembly

12. Install inner seat track bracket cover

13. Install seat track cover

14. Install front seat headrest assembly

​

1. Install the lumbar support adjuster assembly with the 2 screws.

2. Connect the connector.

1. Install the front seat inner belt assembly with the nut.

   Torque:

   42 N*m{428 kgf*cm, 31 ft.*lbf}

   NOTICE:

   Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding parts of the front seat adjuster.

2. for Driver seat:
   

   1. Connect the connectors and engage the 4 clamps.

3. for Passenger seat:
   

   1. Connect the connector and engage the 3 clamps.

1. Slide the inner seat track bracket cover along the seat rail toward the front of the vehicle. Engage claw A to the seat rail.

2. Push the inner seat track bracket cover to engage claw B.

1. Slide the seat track cover along the seat rail toward the front of the vehicle. Engage claw A to the seat rail.

2. Push the seat track cover to engage claw B.