Power Seat Switch - Inspection

Brand:

Toyota

Model Name:

Camry ACV40 GSV40

Manual:

Repair Manual

Section:

Seat

Title:

Power Seat Switch

  1. Inspect front power seat switch lh (for lhd)

  2. Inspect front power seat switch rh (for lhd)

  3. Inspect front power seat switch rh (for rhd)

  4. Inspect front power seat switch lh (for rhd)



​

1. INSPECT FRONT POWER SEAT SWITCH LH (for LHD)
  1. Measure the resistance between the specified terminals when each switch is operated.Standard resistance (Slide switch):Tester ConnectionSwitch ConditionSpecified ConditionU7-1 (B) - U7-9 (SLDF)FRONTBelow 1 ΩU7-4 (E) - U7-6 (SLDR)FRONTBelow 1 ΩU7-1 (B) - U7-6 (SLDR)FRONT10 kΩ or higherU7-4 (E) - U7-9 (SLDF)FRONT10 kΩ or higherU7-4 (E) - U7-6 (SLDR)OFFBelow 1 ΩU7-4 (E) - U7-9 (SLDF)OFFBelow 1 ΩU7-1 (B) - U7-6 (SLDR)OFF10 kΩ or higherU7-1 (B) - U7-9 (SLDF)OFF10 kΩ or higherU7-1 (B) - U7-6 (SLDR)REARBelow 1 ΩU7-4 (E) - U7-9 (SLDF)REARBelow 1 ΩU7-1 (B) - U7-9 (SLDF)REAR10 kΩ or higherU7-4 (E) - U7-6 (SLDR)REAR10 kΩ or higherStandard resistance (Front vertical switch):Tester ConnectionSwitch ConditionSpecified ConditionU7-1 (B) - U7-10 (FUP)UPBelow 1 ΩU7-4 (E) - U7-5 (FDWN)UPBelow 1 ΩU7-1 (B) - U7-5 (FDWN)UP10 kΩ or higherU7-4 (E) - U7-10 (FUP)UP10 kΩ or higherU7-4 (E) - U7-5 (FDWN)OFFBelow 1 ΩU7-4 (E) - U7-10 (FUP)OFFBelow 1 ΩU7-1 (B) - U7- 5 (FDWN)OFF10 kΩ or higherU7-1 (B) - U7-10 (FUP)OFF10 kΩ or higherU7-1 (B) - U7-5 (FDWN)DOWNBelow 1 ΩU7-4 (E) - U7-10 (FUP)DOWNBelow 1 ΩU7-1 (B) - U7-10 (FUP)DOWN10 kΩ or higherU7-4 (E) - U7-5 (FDWN)DOWN10 kΩ or higherStandard resistance (Lifter switch):Tester ConnectionSwitch ConditionSpecified ConditionU7-1 (B) - U7-7 (LUP)UPBelow 1 ΩU7-4 (E) - U7-8 (LDWN)UPBelow 1 ΩU7-1 (B) - U7-8 (LDWN)UP10 kΩ or higherU7-4 (E) - U7-7 (LUP)UP10 kΩ or higherU7-4 (E) - U7-7 (LUP)OFFBelow 1 ΩU7-4 (E) - U7-8 (LDWN)OFFBelow 1 ΩU7-1 (B) - U7-7 (LUP)OFF10 kΩ or higherU7-1 (B) - U7-8 (LDWN)OFF10 kΩ or higherU7-1 (B) - U7-8 (LDWN)DOWNBelow 1 ΩU7-4 (E) - U7-7 (LUP)DOWNBelow 1 ΩU7-1 (B) - U7-7 (LUP)DOWN10 kΩ or higherU7-4 (E) - U7-8 (LDWN)DOWN10 kΩ or higherStandard resistance (Reclining switch):Tester ConnectionSwitch ConditionSpecified ConditionU7-1 (B) - U7-3 (RCLF)FRONTBelow 1 ΩU7-4 (E) - U7-2 (RCLR)FRONTBelow 1 ΩU7-1 (B) - U7-2 (RCLR)FRONT10 kΩ or higherU7-4 (E) -U7-3 (RCLF)FRONT10 kΩ or higherU7-4 (E) - U7-2 (RCLR)OFFBelow 1 ΩU7-4 (E) - U7-3 (RCLF)OFFBelow 1 ΩU7-1 (B) - U7-3 (RCLF)OFF10 kΩ or higherU7-1 (B) - U7-2 (RCLR)OFF10 kΩ or higherU7-1 (B) - U7-2 (RCLR)REARBelow 1 ΩU7-4 (E) - U7-3 (RCLF)REARBelow 1 ΩU7-1 (B) - U7-3 (RCLF)REAR10 kΩ or higherU7-4 (E) - U7-2 (RCLR)REAR10 kΩ or higherIf the result is not as specified, replace the switch. Camry

  2. Measure the resistance between the specified terminals when each switch is operated.

    Standard resistance (Slide switch):
    Tester Connection
    		Switch Condition
    		Specified Condition
    U7-1 (B) - U7-9 (SLDF)
    		FRONT
    		Below 1 Ω
    U7-4 (E) - U7-6 (SLDR)
    		FRONT
    		Below 1 Ω
    U7-1 (B) - U7-6 (SLDR)
    		FRONT
    		10 kΩ or higher
    U7-4 (E) - U7-9 (SLDF)
    		FRONT
    		10 kΩ or higher
    U7-4 (E) - U7-6 (SLDR)
    		OFF
    		Below 1 Ω
    U7-4 (E) - U7-9 (SLDF)
    		OFF
    		Below 1 Ω
    U7-1 (B) - U7-6 (SLDR)
    		OFF
    		10 kΩ or higher
    U7-1 (B) - U7-9 (SLDF)
    		OFF
    		10 kΩ or higher
    U7-1 (B) - U7-6 (SLDR)
    		REAR
    		Below 1 Ω
    U7-4 (E) - U7-9 (SLDF)
    		REAR
    		Below 1 Ω
    U7-1 (B) - U7-9 (SLDF)
    		REAR
    		10 kΩ or higher
    U7-4 (E) - U7-6 (SLDR)
    		REAR
    		10 kΩ or higher
    Standard resistance (Front vertical switch):
    Tester Connection
    		Switch Condition
    		Specified Condition
    U7-1 (B) - U7-10 (FUP)
    		UP
    		Below 1 Ω
    U7-4 (E) - U7-5 (FDWN)
    		UP
    		Below 1 Ω
    U7-1 (B) - U7-5 (FDWN)
    		UP
    		10 kΩ or higher
    U7-4 (E) - U7-10 (FUP)
    		UP
    		10 kΩ or higher
    U7-4 (E) - U7-5 (FDWN)
    		OFF
    		Below 1 Ω
    U7-4 (E) - U7-10 (FUP)
    		OFF
    		Below 1 Ω
    U7-1 (B) - U7- 5 (FDWN)
    		OFF
    		10 kΩ or higher
    U7-1 (B) - U7-10 (FUP)
    		OFF
    		10 kΩ or higher
    U7-1 (B) - U7-5 (FDWN)
    		DOWN
    		Below 1 Ω
    U7-4 (E) - U7-10 (FUP)
    		DOWN
    		Below 1 Ω
    U7-1 (B) - U7-10 (FUP)
    		DOWN
    		10 kΩ or higher
    U7-4 (E) - U7-5 (FDWN)
    		DOWN
    		10 kΩ or higher
    Standard resistance (Lifter switch):
    Tester Connection
    		Switch Condition
    		Specified Condition
    U7-1 (B) - U7-7 (LUP)
    		UP
    		Below 1 Ω
    U7-4 (E) - U7-8 (LDWN)
    		UP
    		Below 1 Ω
    U7-1 (B) - U7-8 (LDWN)
    		UP
    		10 kΩ or higher
    U7-4 (E) - U7-7 (LUP)
    		UP
    		10 kΩ or higher
    U7-4 (E) - U7-7 (LUP)
    		OFF
    		Below 1 Ω
    U7-4 (E) - U7-8 (LDWN)
    		OFF
    		Below 1 Ω
    U7-1 (B) - U7-7 (LUP)
    		OFF
    		10 kΩ or higher
    U7-1 (B) - U7-8 (LDWN)
    		OFF
    		10 kΩ or higher
    U7-1 (B) - U7-8 (LDWN)
    		DOWN
    		Below 1 Ω
    U7-4 (E) - U7-7 (LUP)
    		DOWN
    		Below 1 Ω
    U7-1 (B) - U7-7 (LUP)
    		DOWN
    		10 kΩ or higher
    U7-4 (E) - U7-8 (LDWN)
    		DOWN
    		10 kΩ or higher
    Standard resistance (Reclining switch):
    Tester Connection
    		Switch Condition
    		Specified Condition
    U7-1 (B) - U7-3 (RCLF)
    		FRONT
    		Below 1 Ω
    U7-4 (E) - U7-2 (RCLR)
    		FRONT
    		Below 1 Ω
    U7-1 (B) - U7-2 (RCLR)
    		FRONT
    		10 kΩ or higher
    U7-4 (E) -U7-3 (RCLF)
    		FRONT
    		10 kΩ or higher
    U7-4 (E) - U7-2 (RCLR)
    		OFF
    		Below 1 Ω
    U7-4 (E) - U7-3 (RCLF)
    		OFF
    		Below 1 Ω
    U7-1 (B) - U7-3 (RCLF)
    		OFF
    		10 kΩ or higher
    U7-1 (B) - U7-2 (RCLR)
    		OFF
    		10 kΩ or higher
    U7-1 (B) - U7-2 (RCLR)
    		REAR
    		Below 1 Ω
    U7-4 (E) - U7-3 (RCLF)
    		REAR
    		Below 1 Ω
    U7-1 (B) - U7-3 (RCLF)
    		REAR
    		10 kΩ or higher
    U7-4 (E) - U7-2 (RCLR)
    		REAR
    		10 kΩ or higher
    If the result is not as specified, replace the switch.


2. INSPECT FRONT POWER SEAT SWITCH RH (for LHD)
  1. Measure the resistance between the specified terminals when each switch is operated.Standard resistance (Slide switch):Tester ConnectionSwitch ConditionSpecified ConditionT8-1 (B) - T8-9 (SLDF)FRONTBelow 1 ΩT8-4 (E) - T8-6 (SLDR)FRONTBelow 1 ΩT8-1 (B) - T8-6 (SLDR)FRONT10 kΩ or higherT8-4 (E) - T8-9 (SLDF)FRONT10 kΩ or higherT8-4 (E) - T8-6 (SLDR)OFFBelow 1 ΩT8-4 (E) - T8-9 (SLDF)OFFBelow 1 ΩT8-1 (B) - T8-6 (SLDR)OFF10 kΩ or higherT8-1 (B) - T8-9 (SLDF)OFF10 kΩ or higherT8-1 (B) - T8-6 (SLDR)REARBelow 1 ΩT8-4 (E) - T8-9 (SLDF)REARBelow 1 ΩT8-1 (B) - T8-9 (SLDF)REAR10 kΩ or higherT8-4 (E) - T8-6 (SLDR)REAR10 kΩ or higherStandard resistance (Reclining switch):Tester ConnectionSwitch ConditionSpecified ConditionT8-1 (B) - T8-3 (RCLF)FRONTBelow 1 ΩT8-4 (E) - T8-2 (RCLR)FRONTBelow 1 ΩT8-1 (B) - T8-2 (RCLR)FRONT10 kΩ or higherT8-4 (E) - T8-3 (RCLF)FRONT10 kΩ or higherT8-4 (E) - T8-2 (RCLR)OFFBelow 1 ΩT8-4 (E) - T8-3 (RCLF)OFFBelow 1 ΩT8-1 (B) - T8- 3 (RCLF)OFF10 kΩ or higherT8-1 (B) - T8-2 (RCLR)OFF10 kΩ or higherT8-1 (B) - T8-2 (RCLR)REARBelow 1 ΩT8-4 (E) - T8-3 (RCLF)REARBelow 1 ΩT8-1 (B) - T8-3 (RCLF)REAR10 kΩ or higherT8-4 (E) - T8-2 (RCLR)REAR10 kΩ or higherIf the result is not as specified, replace the switch. Camry

  2. Measure the resistance between the specified terminals when each switch is operated.

    Standard resistance (Slide switch):
    Tester Connection
    		Switch Condition
    		Specified Condition
    T8-1 (B) - T8-9 (SLDF)
    		FRONT
    		Below 1 Ω
    T8-4 (E) - T8-6 (SLDR)
    		FRONT
    		Below 1 Ω
    T8-1 (B) - T8-6 (SLDR)
    		FRONT
    		10 kΩ or higher
    T8-4 (E) - T8-9 (SLDF)
    		FRONT
    		10 kΩ or higher
    T8-4 (E) - T8-6 (SLDR)
    		OFF
    		Below 1 Ω
    T8-4 (E) - T8-9 (SLDF)
    		OFF
    		Below 1 Ω
    T8-1 (B) - T8-6 (SLDR)
    		OFF
    		10 kΩ or higher
    T8-1 (B) - T8-9 (SLDF)
    		OFF
    		10 kΩ or higher
    T8-1 (B) - T8-6 (SLDR)
    		REAR
    		Below 1 Ω
    T8-4 (E) - T8-9 (SLDF)
    		REAR
    		Below 1 Ω
    T8-1 (B) - T8-9 (SLDF)
    		REAR
    		10 kΩ or higher
    T8-4 (E) - T8-6 (SLDR)
    		REAR
    		10 kΩ or higher
    Standard resistance (Reclining switch):
    Tester Connection
    		Switch Condition
    		Specified Condition
    T8-1 (B) - T8-3 (RCLF)
    		FRONT
    		Below 1 Ω
    T8-4 (E) - T8-2 (RCLR)
    		FRONT
    		Below 1 Ω
    T8-1 (B) - T8-2 (RCLR)
    		FRONT
    		10 kΩ or higher
    T8-4 (E) - T8-3 (RCLF)
    		FRONT
    		10 kΩ or higher
    T8-4 (E) - T8-2 (RCLR)
    		OFF
    		Below 1 Ω
    T8-4 (E) - T8-3 (RCLF)
    		OFF
    		Below 1 Ω
    T8-1 (B) - T8- 3 (RCLF)
    		OFF
    		10 kΩ or higher
    T8-1 (B) - T8-2 (RCLR)
    		OFF
    		10 kΩ or higher
    T8-1 (B) - T8-2 (RCLR)
    		REAR
    		Below 1 Ω
    T8-4 (E) - T8-3 (RCLF)
    		REAR
    		Below 1 Ω
    T8-1 (B) - T8-3 (RCLF)
    		REAR
    		10 kΩ or higher
    T8-4 (E) - T8-2 (RCLR)
    		REAR
    		10 kΩ or higher
    If the result is not as specified, replace the switch.


3. INSPECT FRONT POWER SEAT SWITCH RH (for RHD)
  1. Measure the resistance between the specified terminals when each switch is operated.Standard resistance (Slide switch):Tester ConnectionSwitch ConditionSpecified ConditionT8-1 (B) - T8-9 (SLDF)FRONTBelow 1 ΩT8-4 (E) - T8-6 (SLDR)FRONTBelow 1 ΩT8-1 (B) - T8-6 (SLDR)FRONT10 kΩ or higherT8-4 (E) - T8-9 (SLDF)FRONT10 kΩ or higherT8-4 (E) - T8-6 (SLDR)OFFBelow 1 ΩT8-4 (E) - T8-9 (SLDF)OFFBelow 1 ΩT8-1 (B) - T8-6 (SLDR)OFF10 kΩ or higherT8-1 (B) - T8-9 (SLDF)OFF10 kΩ or higherT8-1 (B) - T8-6 (SLDR)REARBelow 1 ΩT8-4 (E) - T8-9 (SLDF)REARBelow 1 ΩT8-1 (B) - T8-9 (SLDF)REAR10 kΩ or higherT8-4 (E) - T8-6 (SLDR)REAR10 kΩ or higherStandard resistance (Front vertical switch):Tester ConnectionSwitch ConditionSpecified ConditionT8-1 (B) - T8-5 (FUP)UPBelow 1 ΩT8-4 (E) - T8-10 (FDWN)UPBelow 1 ΩT8-1 (B) - T8-10 (FDWN)UP10 kΩ or higherT8-4 (E) - T8-5 (FUP)UP10 kΩ or higherT8-4 (E) - T8-10 (FDWN)OFFBelow 1 ΩT8-4 (E) - T8-5 (FUP)OFFBelow 1 ΩT8-1 (B) - T8-10 (FDWN)OFF10 kΩ or higherT8-1 (B) - T8-5 (FUP)OFF10 kΩ or higherT8-1 (B) - T8-10 (FDWN)DOWNBelow 1 ΩT8-4 (E) - T8-5 (FUP)DOWNBelow 1 ΩT8-1 (B) - T8-5 (FUP)DOWN10 kΩ or higherT8-4 (E) - T8-10 (FDWN)DOWN10 kΩ or higherStandard resistance (Lifter switch):Tester ConnectionSwitch ConditionSpecified ConditionT8-1 (B) - T8-8 (LUP)UPBelow 1 ΩT8-4 (E) - T8-7 (LDWN)UPBelow 1 ΩT8-1 (B) - T8-7 (LDWN)UP10 kΩ or higherT8-4 (E) - T8-8 (LUP)UP10 kΩ or higherT8-4 (E) - T8-8 (LUP)OFFBelow 1 ΩT8-4 (E) - T8-7 (LDWN)OFFBelow 1 ΩT8-1 (B) - T8-8 (LUP)OFF10 kΩ or higherT8-1 (B) - T8-7 (LDWN)OFF10 kΩ or higherT8-1 (B) - T8-7 (LDWN)DOWNBelow 1 ΩT8-4 (E) - T8-8 (LUP)DOWNBelow 1 ΩT8-1 (B) - T8-8 (LUP)DOWN10 kΩ or higherT8-4 (E) - T8-7 (LDWN)DOWN10 kΩ or higherStandard resistance (Reclining switch):Tester ConnectionSwitch ConditionSpecified ConditionT8-1 (B) - T8-3 (RCLF)FRONTBelow 1 ΩT8-4 (E) - T8-2 (RCLR)FRONTBelow 1 ΩT8-1 (B) - T8-2 (RCLR)FRONT10 kΩ or higherT8-4 (E) -T8-3 (RCLF)FRONT10 kΩ or higherT8-4 (E) - T8-2 (RCLR)OFFBelow 1 ΩT8-4 (E) - T8-3 (RCLF)OFFBelow 1 ΩT8-1 (B) - T8-3 (RCLF)OFF10 kΩ or higherT8-1 (B) - T8-2 (RCLR)OFF10 kΩ or higherT8-1 (B) - T8-2 (RCLR)REARBelow 1 ΩT8-4 (E) - T8-3 (RCLF)REARBelow 1 ΩT8-1 (B) - T8-3 (RCLF)REAR10 kΩ or higherT8-4 (E) - T8-2 (RCLR)REAR10 kΩ or higherIf the result is not as specified, replace the switch. Camry

  2. Measure the resistance between the specified terminals when each switch is operated.

    Standard resistance (Slide switch):
    Tester Connection
    		Switch Condition
    		Specified Condition
    T8-1 (B) - T8-9 (SLDF)
    		FRONT
    		Below 1 Ω
    T8-4 (E) - T8-6 (SLDR)
    		FRONT
    		Below 1 Ω
    T8-1 (B) - T8-6 (SLDR)
    		FRONT
    		10 kΩ or higher
    T8-4 (E) - T8-9 (SLDF)
    		FRONT
    		10 kΩ or higher
    T8-4 (E) - T8-6 (SLDR)
    		OFF
    		Below 1 Ω
    T8-4 (E) - T8-9 (SLDF)
    		OFF
    		Below 1 Ω
    T8-1 (B) - T8-6 (SLDR)
    		OFF
    		10 kΩ or higher
    T8-1 (B) - T8-9 (SLDF)
    		OFF
    		10 kΩ or higher
    T8-1 (B) - T8-6 (SLDR)
    		REAR
    		Below 1 Ω
    T8-4 (E) - T8-9 (SLDF)
    		REAR
    		Below 1 Ω
    T8-1 (B) - T8-9 (SLDF)
    		REAR
    		10 kΩ or higher
    T8-4 (E) - T8-6 (SLDR)
    		REAR
    		10 kΩ or higher
    Standard resistance (Front vertical switch):
    Tester Connection
    		Switch Condition
    		Specified Condition
    T8-1 (B) - T8-5 (FUP)
    		UP
    		Below 1 Ω
    T8-4 (E) - T8-10 (FDWN)
    		UP
    		Below 1 Ω
    T8-1 (B) - T8-10 (FDWN)
    		UP
    		10 kΩ or higher
    T8-4 (E) - T8-5 (FUP)
    		UP
    		10 kΩ or higher
    T8-4 (E) - T8-10 (FDWN)
    		OFF
    		Below 1 Ω
    T8-4 (E) - T8-5 (FUP)
    		OFF
    		Below 1 Ω
    T8-1 (B) - T8-10 (FDWN)
    		OFF
    		10 kΩ or higher
    T8-1 (B) - T8-5 (FUP)
    		OFF
    		10 kΩ or higher
    T8-1 (B) - T8-10 (FDWN)
    		DOWN
    		Below 1 Ω
    T8-4 (E) - T8-5 (FUP)
    		DOWN
    		Below 1 Ω
    T8-1 (B) - T8-5 (FUP)
    		DOWN
    		10 kΩ or higher
    T8-4 (E) - T8-10 (FDWN)
    		DOWN
    		10 kΩ or higher
    Standard resistance (Lifter switch):
    Tester Connection
    		Switch Condition
    		Specified Condition
    T8-1 (B) - T8-8 (LUP)
    		UP
    		Below 1 Ω
    T8-4 (E) - T8-7 (LDWN)
    		UP
    		Below 1 Ω
    T8-1 (B) - T8-7 (LDWN)
    		UP
    		10 kΩ or higher
    T8-4 (E) - T8-8 (LUP)
    		UP
    		10 kΩ or higher
    T8-4 (E) - T8-8 (LUP)
    		OFF
    		Below 1 Ω
    T8-4 (E) - T8-7 (LDWN)
    		OFF
    		Below 1 Ω
    T8-1 (B) - T8-8 (LUP)
    		OFF
    		10 kΩ or higher
    T8-1 (B) - T8-7 (LDWN)
    		OFF
    		10 kΩ or higher
    T8-1 (B) - T8-7 (LDWN)
    		DOWN
    		Below 1 Ω
    T8-4 (E) - T8-8 (LUP)
    		DOWN
    		Below 1 Ω
    T8-1 (B) - T8-8 (LUP)
    		DOWN
    		10 kΩ or higher
    T8-4 (E) - T8-7 (LDWN)
    		DOWN
    		10 kΩ or higher
    Standard resistance (Reclining switch):
    Tester Connection
    		Switch Condition
    		Specified Condition
    T8-1 (B) - T8-3 (RCLF)
    		FRONT
    		Below 1 Ω
    T8-4 (E) - T8-2 (RCLR)
    		FRONT
    		Below 1 Ω
    T8-1 (B) - T8-2 (RCLR)
    		FRONT
    		10 kΩ or higher
    T8-4 (E) -T8-3 (RCLF)
    		FRONT
    		10 kΩ or higher
    T8-4 (E) - T8-2 (RCLR)
    		OFF
    		Below 1 Ω
    T8-4 (E) - T8-3 (RCLF)
    		OFF
    		Below 1 Ω
    T8-1 (B) - T8-3 (RCLF)
    		OFF
    		10 kΩ or higher
    T8-1 (B) - T8-2 (RCLR)
    		OFF
    		10 kΩ or higher
    T8-1 (B) - T8-2 (RCLR)
    		REAR
    		Below 1 Ω
    T8-4 (E) - T8-3 (RCLF)
    		REAR
    		Below 1 Ω
    T8-1 (B) - T8-3 (RCLF)
    		REAR
    		10 kΩ or higher
    T8-4 (E) - T8-2 (RCLR)
    		REAR
    		10 kΩ or higher
    If the result is not as specified, replace the switch.


4. INSPECT FRONT POWER SEAT SWITCH LH (for RHD)
  1. Measure the resistance between the specified terminals when each switch is operated.Standard resistance (Slide switch):Tester ConnectionSwitch ConditionSpecified ConditionU7-1 (B) - U7-9 (SLDF)FRONTBelow 1 ΩU7-4 (E) - U7-6 (SLDR)FRONTBelow 1 ΩU7-1 (B) - U7-6 (SLDR)FRONT10 kΩ or higherU7-4 (E) - U7-9 (SLDF)FRONT10 kΩ or higherU7-4 (E) - U7-6 (SLDR)OFFBelow 1 ΩU7-4 (E) - U7-9 (SLDF)OFFBelow 1 ΩU7-1 (B) - U7-6 (SLDR)OFF10 kΩ or higherU7-1 (B) - U7-9 (SLDF)OFF10 kΩ or higherU7-1 (B) - U7-6 (SLDR)REARBelow 1 ΩU7-4 (E) - U7-9 (SLDF)REARBelow 1 ΩU7-1 (B) - U7-9 (SLDF)REAR10 kΩ or higherU7-4 (E) - U7-6 (SLDR)REAR10 kΩ or higherStandard resistance (Reclining switch):Tester ConnectionSwitch ConditionSpecified ConditionU7-1 (B) - U7-3 (RCLF)FRONTBelow 1 ΩU7-4 (E) - U7-2 (RCLR)FRONTBelow 1 ΩU7-1 (B) - U7-2 (RCLR)FRONT10 kΩ or higherU7-4 (E) - U7-3 (RCLF)FRONT10 kΩ or higherU7-4 (E) - U7-2 (RCLR)OFFBelow 1 ΩU7-4 (E) - U7-3 (RCLF)OFFBelow 1 ΩU7-1 (B) - U7- 3 (RCLF)OFF10 kΩ or higherU7-1 (B) - U7-2 (RCLR)OFF10 kΩ or higherU7-1 (B) - U7-2 (RCLR)REARBelow 1 ΩU7-4 (E) - U7-3 (RCLF)REARBelow 1 ΩU7-1 (B) - U7-3 (RCLF)REAR10 kΩ or higherU7-4 (E) - U7-2 (RCLR)REAR10 kΩ or higherIf the result is not as specified, replace the switch. Camry

  2. Measure the resistance between the specified terminals when each switch is operated.

    Standard resistance (Slide switch):
    Tester Connection
    		Switch Condition
    		Specified Condition
    U7-1 (B) - U7-9 (SLDF)
    		FRONT
    		Below 1 Ω
    U7-4 (E) - U7-6 (SLDR)
    		FRONT
    		Below 1 Ω
    U7-1 (B) - U7-6 (SLDR)
    		FRONT
    		10 kΩ or higher
    U7-4 (E) - U7-9 (SLDF)
    		FRONT
    		10 kΩ or higher
    U7-4 (E) - U7-6 (SLDR)
    		OFF
    		Below 1 Ω
    U7-4 (E) - U7-9 (SLDF)
    		OFF
    		Below 1 Ω
    U7-1 (B) - U7-6 (SLDR)
    		OFF
    		10 kΩ or higher
    U7-1 (B) - U7-9 (SLDF)
    		OFF
    		10 kΩ or higher
    U7-1 (B) - U7-6 (SLDR)
    		REAR
    		Below 1 Ω
    U7-4 (E) - U7-9 (SLDF)
    		REAR
    		Below 1 Ω
    U7-1 (B) - U7-9 (SLDF)
    		REAR
    		10 kΩ or higher
    U7-4 (E) - U7-6 (SLDR)
    		REAR
    		10 kΩ or higher
    Standard resistance (Reclining switch):
    Tester Connection
    		Switch Condition
    		Specified Condition
    U7-1 (B) - U7-3 (RCLF)
    		FRONT
    		Below 1 Ω
    U7-4 (E) - U7-2 (RCLR)
    		FRONT
    		Below 1 Ω
    U7-1 (B) - U7-2 (RCLR)
    		FRONT
    		10 kΩ or higher
    U7-4 (E) - U7-3 (RCLF)
    		FRONT
    		10 kΩ or higher
    U7-4 (E) - U7-2 (RCLR)
    		OFF
    		Below 1 Ω
    U7-4 (E) - U7-3 (RCLF)
    		OFF
    		Below 1 Ω
    U7-1 (B) - U7- 3 (RCLF)
    		OFF
    		10 kΩ or higher
    U7-1 (B) - U7-2 (RCLR)
    		OFF
    		10 kΩ or higher
    U7-1 (B) - U7-2 (RCLR)
    		REAR
    		Below 1 Ω
    U7-4 (E) - U7-3 (RCLF)
    		REAR
    		Below 1 Ω
    U7-1 (B) - U7-3 (RCLF)
    		REAR
    		10 kΩ or higher
    U7-4 (E) - U7-2 (RCLR)
    		REAR
    		10 kΩ or higher
    If the result is not as specified, replace the switch.