Toyota
Camry ACV40 GSV40
Repair Manual
Lighting
Turn Signal Flasher Assembly

Install the clamp and the turn signal flasher assembly.
Connect the connector.

Connect the 2 connectors as shown in the illustration.
Secure the wire harness to the combination meter assembly.

Install the combination meter assembly as shown in the illustration.

Install the 4 screws.

Engage the guide and the 4 claws.
Install the instrument cluster finish panel with the 2 clips.

Engage the 2 claws and 2 clips to install the lower instrument panel finish panel.
Connect each connector.

Engage the 3 claws and 2 clips to install the No. 1 instrument panel sub-assembly.

Engage the claw and install the upper steering column cover.
Engage the 2 claws and install the lower steering column cover.
Install the steering column cover with the 2 screws <D>.
- Torque:
- 2.0 N*m{20 kgf*cm, 18 in.*lbf}

Install the air hose and connect the connector.
Engage the 2 claws and the DLC3.
Engage the claw and the 4 clips.
Instal the lower instrument panel finish panel LH with the screw <B> and bolt <A>.

Engage the 2 clips.
Install the cowl side trim sub-assembly LH with the cowl side trim clip.

Engage the 7 claws and 3 clips, then install the front door scuff plate LH.