Front Seat Assembly (For Manual Seat) - Installation(2006/01 - 2007/12)

1. Install front seat assembly

2. Install inner seat track bracket cover

3. Install seat track cover

4. Install front seat headrest assembly

5. Connect cable to negative battery terminal

6. Inspect slide adjuster lock

7. Inspect srs warning light

​

1. Place the front seat assembly in the vehicle and align the adjuster pin with the hole on the vehicle side.

2. Connect the connector and clamp.

3. Move the front seat assembly to the rearmost position by operating the slide handle.

   NOTICE:

   Check that the seat is locked.

4. Temporarily install the front seat track bracket with the 2 bolts.

5. Move the front seat assembly fully forward by operating the slide handle.

   NOTICE:

   Check that the seat is locked.

6. Temporarily install the rear seat track bracket with the 2 bolts.

7. Move the front seat assembly to the rearmost position by operating the slide handle.

   NOTICE:

   Check that the seat is locked.

8. Fully tighten the 2 bolts on the front seat track bracket in the order of the inner side bolt and then the outer side bolt.

   Torque:

   37 N*m{377 kgf*cm, 27 ft.*lbf}

9. Move the front seat assembly fully forward by operating the slide handle.

   NOTICE:

   Check that the seat is locked.

10. Fully tighten the 2 bolts on the rear seat track bracket in the order of the inner side bolt and then the outer side bolt.

    Torque:

    37 N*m{377 kgf*cm, 27 ft.*lbf}

1. Slide the inner seat track bracket cover along the seat rail toward the front of the vehicle. Engage claw A to the seat rail.

2. Push the seat track bracket cover inner to engage claw B.

1. Slide the seat track cover along the seat rail toward the front of the vehicle. Engage claw A to the seat rail.

2. Push the seat track cover to engage claw B.