Hazard Warning Switch - Inspection

Brand:

Toyota

Model Name:

Camry ACV40 GSV40

Manual:

Repair Manual

Section:

Lighting

Title:

Hazard Warning Switch

  1. Inspect hazard warning signal switch assembly



​

1. INSPECT HAZARD WARNING SIGNAL SWITCH ASSEMBLY
  1. Measure the resistance according to the value(s) in the table below.Standard resistance:Tester ConnectionConditionSpecified Condition5 - 4OFF10 kΩ or higher5 - 4ONBelow 1 ΩIf the result is not as specified, replace the hazard warning signal switch assembly. Camry
  2. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    5 - 4
    OFF
    10 kΩ or higher
    5 - 4
    ON
    Below 1 Ω
    If the result is not as specified, replace the hazard warning signal switch assembly.
  1. Apply battery voltage to the hazard warning signal switch assembly connector.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → Terminal 7
    Battery negative (-) → Terminal 8
    Illumination comes on
    If the result is not as specified, replace the hazard warning signal switch assembly.