Camshaft Position Sensor - Installation(2010/08 - )

1. Install camshaft position sensor

2. Install air cleaner cap sub-assembly

3. Check for engine oil leaks

4. Install no. 1 engine cover sub-assembly

​

1. Apply a light coat of engine oil to the O-ring of the sensor.

   NOTICE:

   Make sure that the O-ring is not cracked or jammed when installing it.

2. Install the sensor with the bolt.

   Torque:

   9.0 N*m{90 kgf*cm, 80 in.*lbf}

3. Connect the sensor connector.

1. Install the air cleaner filter element onto the air cleaner case.

2. Insert the hinges. Install the air cleaner cap sub-assembly with the 2 bolts.

3. Align the matchmarks of the No. 1 air cleaner hose and throttle body, and then connect the air cleaner hose No. 1 to the throttle body and unfasten the No. 1 air cleaner hose clamp.

   NOTICE:

   Make sure that the hose clamp is at the correct angle.

4. Connect the No. 2 ventilation hose to the air cleaner hose.

5. Connect the purge line hose to the clamp (^*1).

6. Connect the 2 purge VSV vacuum hoses (^*2).

7. Connect the purge VSV connector (^*3).

8. Connect the mass air flow meter connector (^*4).

1. Install the engine cover with the 2 nuts.

   Torque:

   9.0 N*m{92 kgf*cm, 80 in.*lbf}