Outer Rear View Mirror - Inspection(2006/01 - 2009/01)

1. Inspect outer rear view mirror assembly rh

2. Inspect outer rear view mirror assembly lh

​

1. Inspect outer mirror motor operation.
   

   1. Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

      Standard:

      Measurement Condition	Specified Condition
      Battery positive (+) → Terminal 3 (MV) Battery negative (-) → Terminal 7 (M+)	Turns upward (A)
      Battery positive (+) → Terminal 7 (M+) Battery negative (-) → Terminal 3 (MV)	Turns downward (B)
      Battery positive (+) → Terminal 6 (MH) Battery negative (-) → Terminal 7 (M+)	Turns left (C)
      Battery positive (+) → Terminal 7 (M+) Battery negative (-) → Terminal 6 (MH)	Turns right (D)

2. Inspect retract mirror operation.
   

   1. Apply battery voltage and check operation of the mirror face, as shown in the table below.

      Standard:

      Measurement Condition	Specified Condition
      Battery positive (+) → Terminal 2 (MF) Battery negative (-) → Terminal 1 (MR)	Returns (Driving position)
      Battery positive (+) → Terminal 1 (MR) Battery negative (-) → Terminal 2 (MF)	Retracts

3. Inspect outer mirror heater operation.
   

   1. Apply battery voltage and check operation of the mirror face, as shown in the table below.

      Standard:

      Measurement Condition	Specified Condition
      Battery positive (+) → Terminal 5 (H+) Battery negative (-) → Terminal 4 (H-)	Mirror surface temperature becomes higher

1. Inspect outer mirror motor operation.
   

   1. Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

      Standard:

      Measurement Condition	Specified Condition
      Battery positive (+) → Terminal 3 (MV) Battery negative (-) → Terminal 7 (M+)	Turns upward (A)
      Battery positive (+) → Terminal 7 (M+) Battery negative (-) → Terminal 3 (MV)	Turns downward (B)
      Battery positive (+) → Terminal 6 (MH) Battery negative (-) → Terminal 7 (M+)	Turns left (C)
      Battery positive (+) → Terminal 7 (M+) Battery negative (-) → Terminal 6 (MH)	Turns right (D)

2. Inspect retract mirror operation.
   

   1. Apply battery voltage and check operation of the mirror face, as shown in the table below.

      Standard:

      Measurement Condition	Specified Condition
      Battery positive (+) → Terminal 2 (MF) Battery negative (-) → Terminal 1 (MR)	Returns (Driving position)
      Battery positive (+) → Terminal 1 (MR) Battery negative (-) → Terminal 2 (MF)	Retracts

3. Inspect outer mirror heater operation.
   

   1. Apply battery voltage and check operation of the mirror face, as shown in the table below.

      Standard:

      Measurement Condition	Specified Condition
      Battery positive (+) → Terminal 5 (H+) Battery negative (-) → Terminal 4 (H-)	Mirror surface temperature becomes higher