Lighting System - Door Lock Position Circuit(2006/01 - 2009/01)

Brand:

Toyota

Model Name:

Camry ACV40 GSV40

Manual:

Repair Manual

Section:

Lighting

Title:

Lighting System

  1. Description

  2. Wiring diagram

  3. Inspection procedure

  4. Read value using intelligent tester

LIGHTING SYSTEM > Door LOCK Position Circuit


​

DESCRIPTION

The main body ECU receives each door lock position switch signal to control the illuminated entry system.

WIRING DIAGRAM


Connect the intelligent tester to the DLC3. Camry


Connect the intelligent tester to the DLC3. Camry


INSPECTION PROCEDURE

1.READ VALUE USING INTELLIGENT TESTER
  1. Connect the intelligent tester to the DLC3.

  1. Turn the ignition switch to the ON position and turn the intelligent tester main switch on.

  1. Select the items below in the DATA LIST, and read the display on the intelligent tester.

    Main Body (Main Body ECU):
    Item
    Measurement Item / Display (Range)
    Normal Condition
    Diagnostic Note
    D-Door Lock Pos SW
    Driver side door lock position switch signal / ON or OFF
    ON: Driver side door is unlocked
    OFF: Driver side door is locked
    -
    P-Door Lock Pos SW
    Passenger side door lock position switch signal / ON or OFF
    ON: Passenger side door or rear LH door or rear RH door is unlocked
    OFF: Passenger side door and rear LH door and rear RH door doors are locked
    -
    OK:
    Normal conditions listed above are displayed.


NGnext
GO TO POWER DOOR LOCK CONTROL SYSTEM
OK
next down
PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE