Park - Neutral Position Switch - Removal(2010/08 - )

Brand:

Toyota

Model Name:

Camry ACV40 GSV40

Manual:

Repair Manual

Section:

U250e Automatic Transaxle

Title:

Park - Neutral Position Switch

  1. Disconnect cable from negative battery terminal

  2. Remove battery

  3. Separate transmission control cable assembly

  4. Remove park/neutral position switch assembly



​

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE BATTERY
  1. Loosen the bolt and nut, and remove the battery clamp. Camry

  2. Loosen the bolt and nut, and remove the battery clamp.

  1. Remove the battery and battery tray.



3. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY
  1. Remove the nut from the control shaft lever. Camry

  2. Remove the nut from the control shaft lever.

  1. Disconnect the transmission control cable assembly from the control shaft lever.

  1. Remove the clip and disconnect the transmission control cable assembly from the No. 1 control cable bracket.NOTICE: Do not hold the resin guide pipe. Camry

  2. Remove the clip and disconnect the transmission control cable assembly from the No. 1 control cable bracket.

    NOTICE:
    Do not hold the resin guide pipe.


4. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY
  1. Disconnect the park/neutral position switch connector. Camry

  2. Disconnect the park/neutral position switch connector.

  1. Remove the nut, washer and control shaft lever. Camry

  2. Remove the nut, washer and control shaft lever.

  1. Using a screwdriver, pry up the lock plate. Camry

  2. Using a screwdriver, pry up the lock plate.

  1. Remove the lock nut and the lock plate. Camry

  2. Remove the lock nut and the lock plate.

  1. Remove the 2 bolts and pull out the park/neutral position switch. Camry

  2. Remove the 2 bolts and pull out the park/neutral position switch.