Toyota
4Runner GRN210 215 UZN210 215
Repair Manual
2Uz-Fe Engine Control System
Sfi System
The ECM monitors the O2S in the various items. You can read the monitor result (TEST DATA) of each monitor item using the O2S TEST RESULT. However, the output value of the TEST DATA is the latest "snapshot" value that is taken after monitoring and therefore it is not dynamic.
In this repair manual, the description of the O2S TEST RESULT (for O2S related DTCs) are written in a table.
If the TEST DATA value appearing on the scan tool is out of the standard value, the O2S is malfunctioning. If it is within the standard value, the O2S is functioning normally. However, if the value is on the borderline of the standard value, the O2S may malfunction very soon.
- TEST ID (a code applied to each TEST DATA)
- Description of TEST DATA
- Conversion Factor (When Conversion Factor has a value written in the table, multiply the TEST DATA value appearing on the scan tool by the Conversion Factor value. The result will be the required value.)
- Unit
- Standard Value
Connect the intelligent tester to the DLC3.

On the tester screen, select the following menus: DIAGNOSIS/CARB OBDII/O2S TEST RESULT. A list of the O2S equipped on the vehicle will be displayed.

Select the desired O2S and press ENTER. The following screen will appear.
Press HELP and * simultaneously. More information will appear.
Example:
The intelligent tester displays "17" as a value of the "TIME $81" (Procedure "A") (see the illustration).
Find the Conversion Factor value of "TIME $81" in the O2S TEST RESULT chart below. 0.3906 is specified for $81 in this chart (Procedure "B").
Multiply "17" in procedure "A" by 0.3906 (Conversion Factor) in the procedure "B".
17 x 0.3906 = 6.6 %If the answer is within the standard value, the "TIME $81" can be confirmed to be normal.
O2S TEST RESULT Chart TEST ID Description of TEST DATA Conversion Factor Unit Standard Value $81 Percentage of monitoring time when the HO2S voltage is less than 0.05V Multiply 0.3906 % Within 60 %