Engine Front Oil Seal - Removal

1. Disconnect cable from negative battery terminal

2. Remove v-bank cover

3. Remove radiator support seal upper

4. Remove no. 1 engine under cover sub-assembly

5. Loosen fan with fluid coupling

6. Remove fan and generator v belt

7. Remove fan with fluid coupling

8. Remove crankshaft pulley

9. Remove timing gear case or timing chain case oil seal

​

1. Remove the 2 nuts, then remove the V-bank cover.

1. Remove the 11 clips and radiator support seal upper.

1. Remove the 4 bolts and engine under cover.

1. Loosen the 4 fluid coupling bolts.

1. While releasing the belt tension by turning the belt tensioner counterclockwise, remove the V-ribbed belt from the belt tensioner.

1. Unfasten the hose clamp, and then separate the 2 oil cooler hoses from the fan shroud.

2. Disconnect the radiator reserve tank hose.

3. Remove the 2 fan shroud bolts and radiator reserve tank bolt.

4. Remove the 4 fluid coupling nuts, and then remove the fan with fluid coupling and fan shroud together.

5. Remove the fan pulley.

HINT:

(Click here)

SST

09213-54015 (91651-60855)
09330-00021
09950-50013 (09951-05010, 09952-05010, 09953-05020, 09954-05030)

1. Using a screwdriver, pry out the oil seal.

   NOTICE:

   Be careful not to damage the crankshaft. Wrap the tip of the screwdriver with tape.