Voltage Inverter - On-Vehicle Inspection

Brand:

Toyota

Model Name:

4Runner GRN210 215 UZN210 215

Manual:

Repair Manual

Section:

Other System

Title:

Voltage Inverter

  1. Inspect voltage inverter



​

1. INSPECT VOLTAGE INVERTER
HINT:
Remove interior parts so that the voltage inverter can be seen.
  1. Disconnect the voltage inverter connector. 4Runner
  2. Disconnect the voltage inverter connector.

  1. Measure the voltage according to the values in the table below.

    Input voltage:

    Tester connection
    Condition
    Specified condition
    IG (V9-1) - E (V9-4)
    Ignition switch ON
    10 to 16 V
    GND (V9-4) - Body ground
    Always
    Below 1 V
    HINT:
    If the result is not as specified, repair or replace harness or connector.
  1. Reconnect the voltage inverter connector. 4Runner
  2. Reconnect the voltage inverter connector.

  1. Measure the voltage according to the values in the table below.

    Output voltage:

    Tester connection
    Condition
    Specified condition
    AC1 (V9-3) - AC2 (V9-7)
    Ignition switch ON
    Main switch ON
    AC 115 V
    HINT:
    If the result is not as specified, replace the voltage inverter.