Crankshaft Position Sensor - Installation

1. Install crankshaft position sensor

2. Install cooler compressor assembly

3. Install engine under cover assembly rear

4. Install generator assembly

​

1. Apply a light coat of engine oil to an O-ring of the crankshaft position sensor.

2. Install the crankshaft position sensor with the bolt.

   Torque:

   10 N*m{102 kgf*cm, 7 ft.*lbf}

3. Connect the crankshaft position sensor connector.

1. Install the cooler compressor assembly with the 4 bolts.

   Torque:

   25 N*m{255 kgf*cm, 18 ft.*lbf}

2. Connect the cooler compressor assembly connector.

3. Install the suction hose sub-assembly with the bolt.

   Torque:

   8.0 N*m{82 kgf*cm, 71 in.*lbf}

1. Install the engine under cover assembly rear with the 4 bolts.

   Torque:

   29 N*m{296 kgf*cm, 21 ft.*lbf}

1. Install the generator assembly with the 2 bolts.

   Torque:

   43 N*m{438 kgf*cm, 32 ft.*lbf}

2. Install the wire harness clamp bracket with the 2 bolts.

   Torque:

   8.0 N*m{82 kgf*cm, 71 in.*lbf}

3. Connect the wire harness.
   

   1. Connect the wire harness to the terminal B and install the nut.

      Torque:

      9.8 N*m{100 kgf*cm, 7 ft.*lbf}

   2. Connect the connector to the generator assembly.

   3. Install the wire harness stay with the bolt.

      Torque:

      8.0 N*m{82 kgf*cm, 71 in.*lbf}