Brand:

Toyota

Model Name:

4Runner GRN210 215 UZN210 215

Manual:

Repair Manual

Section:

1Gr-Fe Engine Control System

Title:

Sfi System

  1. Check battery voltage

  2. Check whether engine cranks

  3. Check whether engine starts

  4. Check air filter

  5. Check idling speed

  6. Check fuel pressure

  7. Check for spark


When a malfunction is not confirmed by the DTC check, troubleshooting should be carried out in all circuits considered to be possible causes of the problem. In many cases, by carrying out the basic engine check shown in the following flowchart, the location of the problem can be found quickly and efficiently. Therefore, using this check is essential when engine troubleshooting.

​

1.CHECK BATTERY VOLTAGE
  1. NOTICE:
  2. Carry out this check with the engine stopped and ignition switch OFF.
  3. Result:
    Result
    		Proceed to
    11 V or more
    		OK
    Below 11 V
    		NG


NG.next
CHARGE OR REPLACE BATTERY
OK
next down

2.CHECK WHETHER ENGINE CRANKS


    		NG.next
    		PROCEED TO PROBLEM SYMPTOMS TABLE
    OK
    next down

    3.CHECK WHETHER ENGINE STARTS


      		NG.next
      		GO TO STEP 6
      OK
      next down

      4.CHECK AIR FILTER

      1. Visually check that the air filter is not excessively contaminated with dirt or oil.



      		NG.next
      		REPLACE AIR FILTER
      OK
      next down

      5.CHECK IDLING SPEED

      1. Check the idling speed (Click here).



      		NG.next
      		TROUBLESHOOT IDLING SPEED AND PROCEED TO NEXT STEP
      OK
      next down

      6.CHECK FUEL PRESSURE

      1. Check the fuel pressure (Click here).



      		NG.next
      		TROUBLESHOOT FUEL PRESSURE AND PROCEED TO NEXT STEP
      OK
      next down

      7.CHECK FOR SPARK

      1. Check for spark (Click here).



      		NG.next
      		TROUBLESHOOT SPARK AND PROCEED TO NEXT STEP
      OK
      next down
      PROCEED TO PROBLEM SYMPTOMS TABLE