Sfi System - P0630

Brand:

Toyota

Model Name:

4Runner GRN210 215 UZN210 215

Manual:

Repair Manual

Section:

2Uz-Fe Engine Control System

Title:

Sfi System

  1. Description

  2. Monitor strategy

  3. Typical enabling conditions

  4. Typical malfunction thresholds

  5. Component operating range

  6. Inspection procedure

  7. Read current dtc

  8. Input vin with intelligent tester

DTC P0630 VIN not Programmed or Mismatch - ECM / PCM


​

DESCRIPTION

DTC P0630 is set if the Vehicle Identification Number (VIN) is not stored in the ECM or the input VIN is not accurate. Input the VIN with the intelligent tester.

DTC No.
DTC Detection Condition
Trouble Area
P0630
  1. VIN not stored in ECM
  2. Input VIN in ECM not accurate
ECM

MONITOR STRATEGY


Related DTCs
P0630: VIN not programmed
Required Sensors/Components (Main)
ECM
Required Sensors/Components (Related)
-
Frequency of Operation
Continuous
Duration
0.325 seconds
MIL Operation
Immediate
Sequence of Operation
None

TYPICAL ENABLING CONDITIONS


The monitor will run whenever this DTC is not present
None
Battery voltage
8 V or more
Ignition switch
ON
Starter
OFF

TYPICAL MALFUNCTION THRESHOLDS


VIN code
Not programmed

COMPONENT OPERATING RANGE


VIN code
Programmed

INSPECTION PROCEDURE

1.READ CURRENT DTC

  1. Connect the intelligent tester to the DLC3 with CAN VIM.

  1. Turn the ignition switch ON and turn the tester ON.

  1. Enter the following menus: DIAGNOSIS / ENHANCED OBD II / DAC INFO / CURRENT CODES.

  1. Read DTCs.

    Result:

    Display (DTC Output)
    		Proceed to
    P0630
    		A
    P0630 and other DTCs
    		B
    1. If any DTCs other than P0630 are output, troubleshoot those DTCs first.
    NOTICE:
    If P0630 is set, the VIN must be input to the ECM using the intelligent tester. However, all DTCs are cleared automatically by the tester when inputting the VIN. If DTCs other than P0630 are set, check them first.


Bnext
GO TO DTC CHART
A
next down

2.INPUT VIN WITH INTELLIGENT TESTER

  1. Input VIN with intelligent tester (Click here).


NEXT
next down
END